Raspberry Pi with AD Board & Touch Display

Best match with Raspberry Pi 3B+ display solution

▶ Panel Optional
●11.6"~17.3" Panel
●1366x768(HD), 1920x1080(FHD)
●Brightness 250~300 cd/㎡

▶ AD Board
●HDMI Interface
●OSD Key Built-in
●One power cable offer electric for AD Board & Raspberry Pi

▶ Touch Optional
●PCAP Touch, COF Type, EETI IC
●Support 10 Points Touch
●Air Bonding

One Power Cable supply

产品描述 Description

与树莓派完美组合的HDMI显示器驱动板, 仅需使用一条电源线即可同时供电给触摸屏. 树莓派. 驱动板,
我们提供支援多指触摸屏11.6" ~ 17.3"皆可选择, 除了不占空间外, 更可导入使用在各式终端产品与创客的领域！

板卡采用Realtek IC兼具稳定性与品质, 自有的千级无尘室为触摸产品贴合品质把关,
同时我们拥有专业的PM. RD人员可以协助您导入, 整合性的树莓派触摸显示套组, 免除您寻料的时间与解决匹配性问题的困扰,
快速的服务与高品质的产品, 让您在研发与DIY的过程更加的顺利！

Brass Copper Pillar Standoff

Raspberry Pi 3B+ Specification	SOC	Broadcom BCM2837B0, Cortex-A53
	CPU	64-bit SoC@1.4GHz, Quadro Core
	Memory	1GB LPDDR2 SDRAM
	IO	Extended 40pin GPIO Header
	Wifi	2.4GHz and 5GHz IEEE
	Bluetooth	Bluetooth 4.2, BLE
	Ethernet	300Mbps
	USB	USB 2.0 Ports x 4
AD Board Specification	Input	HDMI connector x 2 (HDMI 1.4a)
		Display Port connector x 1 (DP 1.1a)
	Output	1/2 Lane eDP Interface to panel
		Speaker 8 Ohm - 1.6w + 1.6W
	DC-IN	+12V and up 1A Adaptor
	Panel Power	3.3V
	Dimension	100mm(W) x 85mm(H) x 9.6mm(D)
Touch Optional Specification	Touch Type	PCAP
	Bonding Type	Air Bonding
	Touch Structure	G/G
	Touch IC	EETI
	Surface Hardness	≧6H
	FPC Type	COF
	Allow Touch Points	10 Points
	Touch Interface	USB
Panel Optional Specification	Inch	11.6"	12.5"	13.3"	14"	15.6"	17.3"
	Resolution	1366 x 768	1920 x 1080	1920 x 1080	1920 x 1080	1920 x 1080	1920 x 1080
	Brightness	250	250 ~ 300	250 ~ 300	250 ~ 300	250	250 ~ 300
	Viewing Angle	89/89/89/89	85/85/85/85	85/85/85/85	85/85/85/85	85/85/85/85	85/85/85/85
	LED Life Time(Hrs)	15,000	15,000	15,000	15,000	15,000	15,000
	Interface	eDP	eDP	eDP	eDP	eDP	eDP

产品特色 Features

●采用投射式电容,可多点触控,高耐用.高透光性

●板卡采用工业级Realtek IC,稳定性.精准度.耐用度极高

●与树莓派完全相容,并提供液晶屏精确参数.展现最佳效果

●树莓派与驱动板完美组合, 节省空间

●一条电源线即可供应电给触摸屏. 树莓派与驱动板

●适用于POS机.Gaming.IPC.HMI.KIOSK.KVM.笔电.强固型平板.自动化设备等各式互动环境

2D图面 Drawing

Front view	Front view 2D Drawing

AD-0112 2D Drawing

整组品项 One Set Including

Number	Item	Remark
A+B	Touch Display	11.6"~17.3" PCAP Touch Display (Optional)
C	AD Board	HDMI to LVDS LCD Controller Board (OSD Built-In)
D	Raspberry Pi	Raspberry Pi 3B+
E	LVDS Cable	AD Board to Panel LVDS Cable
F	Touch USB Cable	AD Board to Touch USB Cable
G	USB Cable	AD Board to Raspberry Pi 3B+ USB Cable
H	HDMI Cable	AD Board to Raspberry Pi 3B+ HDMI Cable
I	Power Cable	AD Board to Raspberry Pi 3B+ Power Cable
J	Copper Pillar	Brass Copper Pillar Standoff 4x

Raspberry Pi with AD Board & Touch Display one set including

RASPBERRY PI AD BOARD 树莓派

AD Board for Raspberry Pi (11.6"~17.3" Display Solution)