8.4 RTP GLASS 8.4" PCAP Touch & RTP Touch (Glass)

8.4 RTP GLASS
8.4 RTP GLASS
8.4 RTP GLASS
8.4 RTP GLASS

8.4" B084R5U-E01 RTP Touch (Glass)

Touch
Touch Type:8.4" RTP
5 Wires
Structure:F/G
Touch IC:EETI
Transparency:≧ 79%
Surface Hardness:≧ 3H
FPC Type:COB
Interface:USB
A/A Outline Dimension (HxV):171.4mm x 128.8mm
Outline Dimension (HxV):186.9mm x 142.3mm
Temperature Range:
Operating(℃):-20~70
Stroage(℃):-40~80
Browsing History
Information

EETI Driver Download

B084R5U-E01

 

●8.4" RTP Touch (Glass)
●Structure:F/G
●Touch IC:EETI
●Transparency:79%
●Surface Hardness:3H
●FPC Type:COB
●Interface:USB
●Touch with Glove Available
●Optional Bonding Service(Air Bonding / OCR Bonding)

 

Description

 

The Resistive touch panel is generally classified into 4-wire, 5-wire, and 8-wire type.
A panel construction consists of two separate layers –transparency conductive ITO film layer and ITO glass layer.
One layer carries the X electrodes and the other carries the Y electrodes. Both electrodes are bonded facing each other and are held separated by dot spacers to isolate electrical contact when not pressed.
A touch (applied pressure) will bring the two layers together to create voltage variation to be detected by the controller and the contact point will then be calculated. Resistive touch panel is a lowest cost touch technology and can be easily assembled. It has become widely used in the touch screen market.

 

We use stable ICs and bonding equipment to maintain high yield and quality.
Touch function requires professional calibration to avoid the interference of the motherboard,
driver board and other electrical appliances to achieve the best experience.
We have professional knowledge, technology and clean room to bring customers high reliability products!

 

8.4" RTP Touch (Glass)
Specification
Touch Type 5-Wire RTP
Structure F/G
Touch IC EETI
Transparency ≧79%
Sufrace Hardness  ≧3H
FPC Type COB
Interface USB
Touch with Glove Available
Operating Temperature -20 ~ 70℃
Storage Temperature -40 ~ 80℃
A/A Dimension (HxV) 171.4mm x 128.8mm
Outline Dimension (HxV) 186.9mm x 142.3mm

 

Features

 

RTP Touch

●5-Wire Resistive Touch, Technologically mature, and can be used with gloves in harsh environments.

●EETI IC offers top notch reliability, precision, and robustness

●Class 1,000 Clean. Fast Delivery. High Quality. (Air Bonding / OCR Bonding)

 

2D Drawing
Front view

Front view 2D Drawing

B084R5U-E01 Front view

B084R5U-E01 2D Drawing

B000RMU-E01 Front view

B000RMU-E01 2D Drawing

FAQ
Should I choose PCAP or RTP Touch?
According your application, If your product is for normal consumer or need multi-touch function,
PCAP touch is your best choice. It has short respons time, beautiful and high surface hardness flat touch design.
If your product is used in hard environment, RTP touch supports wearing thick gloves touch,
and prevent accidentally touch’s one point touch function. (Introduction to Touch Technology)
Should I choose Air Bonding or Optical Bonding?
Because Air Bonding have an air gap between touch and panel,
it causing light reflection to influences slight visual performance. But Air Bonding is more cheaper and easy to make,
so it’s still an economical option. Optical Bonding glue completely gap between touch and panel.
It’s make better contrast, transparency, durable and dust-proof.(Introduction To Bonding Technology)
How do I know the panel size is suitable with Touch(Glass)?
First you need to check the panel’s display area and outline size are match with Touch(Glass),
then make sure what kind of bonding type you perfer.
You can also contact us, we have a professional PM team will provide the most suitable solution for you.
How long is the product warranty?
Besides danmage caused by human factors, within one year warranty from the start of shipping.
If there are special conditions, the warranty time will be separately notified.
If the Touch(Glass) already into your production line to bonding or be used, It’s not covered by warranty.
Place Order0
Contact Us
Designed by: 快樂樹國際有限公司